Bambu Labs X1C Spool Bracket Extender
Only $0.00
Space the metal spool holder bracket off the back of the X1C so you...
Space the metal spool holder bracket off the back of the X1C so you...
Fits Overture Cardboard spools (and others?) with ~2.165 inch (55mm) ID. Should be a...
This clips right over the metal bracket that comes with the Bambu labs X1C...
Manufactured in the USA by P3-d, these heat break tubes are replacements for Kraken or...
Performance 3-D "Ear Saver" straps can be used to relieve ear pressure from some...
Manufactured in the USA by P3-d, these heat break tubes are replacements for v6...
As one of our core competencies, Performance 3-d offers full service engineering and product...
This wear-resistant, high lubricity nozzle is designed specifically to fit your JR Hot End,...
This wear-resistant, high lubricity nozzle is available in three sizes: 0.4mm, 0.5mm or 0.6mm....
Made by 3DXTech, MAX-G™ PETG is made using only premium resins and colorants. We...
Manufactured by 3DXTech in the USA, CarbonX™ CFR-ABS is a high-performance carbon fiber reinforced...
Manufactured in the USA by 3DXTech using premium PETG and High-Modulus Carbon Fiber (not...
Manufactured in the USA by 3DXTech, CarbonX™ Carbon Fiber Reinforced PEI (Polyether Imide) using...
Volcano-Compatible Nozzle Maker Pack contains 5 nozzles, 1 each of the following: 0.3mm, 0.4mm,...
Wear resistant high lubricity nozzles that are a direct replacement for the Volcano series....
Fully heated aluminum build plate for the Makerbot Replicator 2 printer, complete with on/off...
New and improved, version 2 Overhead Spool Holder for Makerbot Replicator 2 machines mounts to...
A Fan Guard to keep those pesky filament strands (and fingers!) from damaging your...
Two simple printable clips that just snap onto your replicator 2 and allow you...
Contains 6 nozzles, 1 each of the following: 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, and...
J-Head style Nozzle Maker Pack contains 5 nozzles, 1 each of the following: 0.3mm,...
Wear resistant high lubricity nozzles compatible with J-Head style hotend extruders. M6x1 thread. The...
As one of our core competencies, Performance 3-d offers full service engineering and product...
As one of our core competencies, Performance 3-d offers full service engineering and product...
As one of our core competencies, Performance 3-d offers full service engineering and product...
As one of our core competencies, Performance 3-d offers full service engineering and product...
As one of our core competencies, Performance 3-d offers full service engineering and product...
The original 3D-printable Twist Drill that accompanies each aluminum arm stiffener kit! "User Speedy777...
This 3M blue painter's tape is the exact same tape that comes on our...
Replace your PTFE tube to keep your extruder running in top shape and prevent...
This is a replacement and upgrade for the factory Makerbot Replicator 2 and 2X...
Engineered Aluminum Arm Stiffeners for Makerbot Replicator 1, Replicator 2, 2X, Flashforge Creator, Wanhao...
Compatibility Zortrax M200 Afinia H479 Afinia H480-01 UP Plus UP Plus 2 UP mini...
4mm inlet bore, for FF Creator, Creator Pro and more. Important: Will ONLY work...
3mm inlet bore, for FF Creator, Wanhao Duplicator and more. Important: Will ONLY work...
Replaces Makerbot Replicator 2/2X and other nozzles with a 2.18mm inlet bore (for 1.75mm...
Direct replacement and upgrade for Makerbot Replicator 1 and Replicator 2 thermal barrier tubes....
This is a Glass Build Plate for Makerbot Replicator 2 machines to replace the stock,...